HOTLINE

+86-13869869238

 

Qingdao Henglin Industrial Group Co., Ltd.

We are currently one of the largest professional industrial research, design, manufacture throwing, shot peening equipment, environmental dust removal equipment, sand processing equipment, V / EPC production line, modeling / core equipment and automated molding equipment industry base.

 

© Copyright 2018 - Qingdao Henglin Industrial Group Co., Ltd.

Tel

+86-13869869238

E-mail

ceoqu@henglingroup.cn

When the accessories of the shot blasting machine need to be replaced

Classification:
Industry News
Release time:
2019/10/15 15:25
       The accessories of the shot blasting machine include side guards, top guards, end guards, blades, splitting wheels and directional sleeves. For these accessories, if the wear is severe and not replaced in time, the service life of the machine will be greatly reduced.
       When the running blasting machine vibrates too much or abnormally, it must be stopped to check the use of the wearing parts and check whether the foreign objects enter the blasting machine. After the cleaning of each shift, the wear of the blasting machine wearing parts should also be checked. When it is found that the wearing parts are seriously worn, they need to be replaced. We can use the data to understand that when the blade thickness is reduced by 4-5mm, the blade length is reduced by 4-5mm, and the blasting machine has severe vibration, the blade needs to be replaced.
       The directional sleeve window wears within 10mm, the window wears 5mm, the directional sleeve position mark needs to be extended, and the directional sleeve reverse wheel impeller rotates 5mm; the window wears 5mm again, the directional sleeve position mark needs to be extended, the directional sleeve reverse wheel impeller rotates 5mm; the window wears 10mm , you need to replace the directional sleeve.
       These are the introductions of our Qingdao Henglin Industrial Group Co., Ltd. in the use of shot blasting machines, how to replace the accessories.
Key words: